Abus PPIC34520 User Manual

9
English
3. Description of hardware functions
3.1. Status LEDs
PPIC32020
LED
Status
Description
Power and status
LED
Lights up green
Camera connected to power
Camera connected to network
Flashes green
Camera set to the factory settings
Camera firmware is being updated
Flashes green
(2 x short & 1 x long)
Camera connected to power
Camera sends its own access point out
Off
Camera has no power supply
Camera not connected to any network
PPIC32520
LED
Status
Description
Power and status
LED
Lights up red
Camera connected to power
Camera connected to network
Flashes red
Camera set to the factory settings
Camera firmware is being updated
Flashes red
(2 x short & 1 x long)
Camera connected to power
Camera sends its own access point out
Off
Camera has no power supply
Camera not connected to any network
PPIC34520 / PPIC35520
LED
Status
Description
Power LED
Lights up red
Camera connected to power
Flashes red
Camera set to the factory settings
Camera firmware is being updated
Off
Camera has no power supply
LED status
Lights up green
Camera connected to network
Flashes green
(2 x short & 1 x long)
Camera sends its own access point out
Off
Camera not connected to any network
3.2. Factory settings / reset
To reset the camera to its factory settings, press and hold the reset button for five seconds while the
camera is operating.

Abus PPIC34520 Specifications

General

Brand	Abus
Model	PPIC34520
Category	Security Camera
Language	English