Abus RM20 - Commissioning and Function; Commissioning; Functionality; Choosing a Location

– 16 –
– 17 –
COMMISSIONING
First of all, remove any activation

make sure that the activation safe-
guard does not get into the device!
Then press the device’s activation


button
has been pushed in, it must

the smoke alarm has been activated
successfully, a brief test tone sounds

will also sound when you press the

verify that the unit is operating

FUNCTION
The heat alarm function is activated
under the following conditions:
• When the temperature is over 40°C
and rises by more than 4°C in
80 seconds
• If the temperature exceeds 60°C for
more than 8 seconds
• Heat alarm tone: single beep, once
a second
• Smoke alarm tone: double beep,
once a second
CHOOSING A LOCATION
Bedroom
Kitchen
Living room
Boiler room
Workshop
room
Children’s
room
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
Bedroom
Bathroom
Kitchen
Living room
Children’s
room
Children’s
room
RM
RM
RM RM
RM
RM

390371_MoAnltg RM 20_D_GB_F_NL_I_11.2012.indd 16 14.11.12 13:16