IMPORTANT NOTE:
The smoke alarm is only able to
provide a warning, and potentially
save lives, if it is located in its intend-
ed installation position, is free from
TESTING AND MAINTENANCE
The smoke detector automatically
checks that it is operating correctly
readjusts the sensitivity of its detec-
tion optics to suit its environmental
The unit gives an early warning if its
energy capacity is low or if the detec-
tion optics have become so full of
imperfections that readjustment is
Please ensure that the air inlets locat-
ed around the edge of the smoke
alarm are never blocked by dust,
You should check that the unit is
functional on a regular basis, at least
once a month, by pressing the test
from damage, that it is held tightly in
Activating the
test tone
Stop: temporarily
deactivate or disable
390371_MoAnltg RM 20_D_GB_F_NL_I_11.2012.indd 20 14.11.12 13:16
To Next Page
Loading...
