Abus RWM250 - Alarm and Indication Sounds; Function; Start up

– 22 –
– 23 –
START UP
First of all, please remove any activa-

safety device) and make sure that the
activation safeguard does not get into
the device! Then, press the device’s





alarm is now activated, a short test

test tone is repeated when you press

indication that the device is ready for

FUNCTION
Heat warning function:
• Heat warning function is triggered
at 60°C
• Single beep every second
ALARM AND INDICATION SOUNDS
Indication sounds:
When the device is activated,
a single sound is emitted (short
 
Volume:
Cause: Activation tone
Indication sounds:
When the test/stop button is
pressed, a single sound (long beep)
 
Volume:
Cause: Test tone
MoAnltg RWM 250_DE_GB_FR_NL_IT_2015_NEU.indd 22 16.07.15 10:12