Abus RWM250 - Assembly; Adhesive Mounting

– 26 –
– 27 –
For this adhesive mounting, only the
supplied adhesivemay be used.
The assembly site must be
• firm
• dry
• free of dust, grease or loose paint,
 
Application:
a) Remove the information sticker and
the protective film from the applied
 
 
b) Press the adhesive surface of the
magnetic holder firmly onto the
 
 
c) Place the device on the magnetic
 
d) The adhesive bond will reach its
 
 

ved from the magnetic holder by
 
ASSEMBLY
The smoke alarm is held in place by
a magnetic holder attached to the

magnetic holder only has a strong
magnetically attractive force from one

either be mounted by an adhesive
fixing or by drilled holes:
1. Adhesive mounting
 
Magnetic holder, self-adhesive
coated in accordance with
EN14604:2005/AC:2008
Warning: The sole use of this self-
adhesive fastener produces a
 
 
• magnetic connection of the device
 
• The device can be detached from
the magnetic holder by gently
 
inspection, maintenance or
 

MoAnltg RWM 250_DE_GB_FR_NL_IT_2015_NEU.indd 26 16.07.15 10:12