– 30 –
have enough time to replace the
smoke alarm with a new device!
You should ensure that the air inlets
around the side of the smoke alarm
never become constricted by dust,
To check that the device is fully func-
tional, you should regularly (at least
To do this, press the Test/Stop button
When you do this, check that the
device is undamaged and securely
fixed to its mounting location, and
To ensure the continued functional
readiness of the alarm, the device
should be maintained as described
in DIN 14676, at least once
To do this, proceed as follows:
Stop: Temporarily
deactivate or silence
• If necessary, dust the device with a
OPERATING LIFE OF THE DEVICE
The maximum service life and the
intended service life of the device
years can be divided into a typical
service life of 10 years plus a maxi-
mum additional 2 years service life/
should replace the device after this
MoAnltg RWM 250_DE_GB_FR_NL_IT_2015_NEU.indd 30 16.07.15 10:12
To Next Page
Loading...
