14
Startup procedure
Thank you for purchasing the 7” Universal test monitor. Please read this quick guide
before using the device.
For using the test monitor safely, please first read the separate attached Safety
Information carefully.
The quick guide should be kept well in case of reference.
If there is any question or problem while using the 7” Universal test monitor, or
damages on the product occurred, please contact our technical support.
Battery
The tester has a built-in lithium ion polymer rechargeable battery.
For safety during transportation, the battery connection inside the battery cabin is
disconnected by a transport securing plastic.
Before using the device, the transport securing plastic must be removed.
For job routine there is no need for the transport securing plastic.
User manual
After powering on the device for the first time it is highly recommended to have a look
at the “Manual” application. There you will find comprehensive instructions, including
user guide for all settings, functions and pre-installed applications, as well as a digital
quick guide and frequently asked questions.
Furthermore, while using pre-installed applications, you can directly open the
application’s instruction picture-in-picture by simply tapping on the application symbol
in the left upper corner of the display.
The ABUS IPCam Plus application also provides user instructions within the
application.
Malfunction
If you should notice abnormal behaviour of the device perform a restart by pressing
more than 2 seconds. If this is not possible in worst case scenario, please remove
the battery and power on the device after restoring the battery.
To Next Page
Loading...
