Abus TVAC25000 - 1 Intended Use; 2 Scope of Delivery; 3 Features and Functions

15
English
1. Intended use
This PoE Injector is used for the transmission of data and power over a standard network cable. The
current is transmitted with 48 VDC by using unused twisted pair of a category 5 network cables.
The injector can be used together with PoE compliant ABUS IP cameras. Together witht the PoE splitter
(TVAC25010) this Injector can be used for combined power and data transmission to a non PoE
compliant ABUS IP camera.
A detailed description of all functions can be found in chapter „3 Features and functions“.
2. Scope of delivery
3. Features and functions
• For Transmission of power and data over a network cable to all PoE compliant ABUS IP cameras
• Transmission range of up to 100 m
• Compliant with IEEE 802.3af standard
• Usage in connection with PoE splitter (TVAC25010) for combined power and data transmission to
ABUS IP cameras without PoE
• Plug & Play
• Short-circuit protected
• Overload protected
• Protected against high voltage
An output voltage over 52 VDC will lead to an automatic reset.
PoE In
j
ector
Power cord
User manual