37
English
LCD/CRT Adjusts gamma value to the video display unit
LCD: Preset for LCD monitors
CRT: Preset for CRT monitors
COMMUNICATION Settings for the RS485 interface of the camera
PROTOCOL (PELCO-D): Protocol information (Pelco-D only)
ADDRESS (1-255): Bus address (bus ID)
BAUDRATE (2400-115200): Baud rate setting
DATABIT (8 BIT): Data bit setting (8 bit only)
PARITY (OFF, ODD, EVEN): Parity setting
STOPBIT (1 BIT): Stop bit setting (1 bit only)
CAMERA ID OFF: Camera name not shown in video image
ON: Camera name shown in video image
Available characters: Letters, numerals, signs, symbols
(CHR1, CHR2)
Up, Down, Right, Left: Change selection and skip to 2nd line
CLR: Delete highlighted character
POS: Change position
RETURN Back to the previous menu page
LANGUAGE
Function Description
LANGUAGE (ENGLISH): The language of the screen menu is fixes as English.
RETURN Back to the previous menu page
VERSION
Function Description
VERSION (1.0): Currently installed firmware version of the camera
RETURN Back to the previous menu page
MAINTENANCE
Function Description
CAMERA RESET Select this function to reset the camera to the factory settings.
RETURN Back to the previous menu page
To Next Page
Loading...
