10
Live view
Switches to the live view of the door station. From here you can also open the live
view of installed network cameras.
Draw area
Here you can define an area to be digitally zoomed.
Note: The system must be restarted to successfully apply the zoom setting.
Clear area
Here you can delete the previously defined area again.
Set area
Here you confirm the previously defined area. After that, you must disconnect
the system from the power and restart it to apply the changes.
Reset
Here you can reset the settings of the digital zoom.
Enable
Here you can start the speech communication via the door station.
Door opener (lock icon)
Here you can activate the door opener (if connected).
Hibernate
Puts the monitor into standby mode.
Settings
Switches to the Settings menu.
To Next Page
Loading...
