Abus TVHS10100 - Settings Menu Options; Password and Sound Settings; Operational Settings; Maintenance Functions

11
Settings
The Settings menu allows you to make all the essential settings for the monitor or
your system.
Password
Here you can change the password assigned during the initial setup.
This password is needed when accessing the system via network.
Sound
Ringtone
Here you can choose between three different ringtones.
Ringtone duration
Here you can define the ringing time (30 to 60 seconds).
Microphone volume
Here you can define the microphone volume from the monitor -
"0" very quiet to "10" very loud.
Speaker volume
Here you can define the speaker volume from the monitor -
"0" very quiet to "10" very loud.
Touch sound
Here you can switch the key tone on or off when using the monitor.
Enable auto answer
If this function is activated, the absence message at the door station will be
played immediately when the bell button is pressed (the message itself cannot
be changed).
DND (Do not disturb) settings
If this function is activated, the call from the door station or another monitor will not be
forwarded to any monitor.
All day
Function is activated permanently.
Schedule
Function is activated within the time defined below.
Maintenance
microSD Card
Here you can format a microSD card inserted in the monitor (up to 32 GB).