12
Clean screen
Here you can lock the screen so that no function is accidentally triggered when
the screen is cleaned.
General information
Modell: Displays the item number of the monitor
Version: Displays the installed firmware version
SN: Displays the serial number of the monitor
Code: This function is currently not used
System language
Here you can choose the display language - German, English, French, Italian,
Danish, Dutch.
Config
Here you can open the advanced settings.
The password for this is: "888999" (the password cannot be changed).
Local info
Monitor type
Here you can define whether the monitor is the main monitor or an additional
monitor (only one main monitor can be defined per system).
Monitor nr.
This feature is currently not available.
Live view duration
Here you can set the display duration of the live image view -
10 to 60 seconds.
Network
Here you can activate the automatic assignment of network parameters via DHCP or
manually enter the network parameters.
Camera
You can add network cameras* that are within the network. These can then be
selected in live view. Click "+" to add a camera, entering the IP address, the RTSP
port (usually 554) and the admin username and password.
* Network cameras must be compatible
NTP
Here you can set an NTP server. The NTP server then automatically synchronizes
the time and date with the system.
To Next Page
Loading...
