To Next PageTo Next Page
Need help?Do you have a question about the Abus TVHS10100 and is the answer not in the manual?
General| Camera | Yes |
|---|---|
| Night vision | Yes |
| Housing material | Plastic |
| Type | Video |
| Display | 4.3 inch TFT |
| Operating temperature | -10°C to +50°C |
Connects the 2-wire cable to the door station at "PLC" contacts. System allows only one door station.
Connects the 2-wire cable to the monitor. Only the 2 upper contacts of the green terminal block are used.
Connects via RS-485 to the door station, must be installed in a safe, non-accessible location.
Steps to enable the device, set a password, and select the display language.
Defining the main monitor and selecting the door station and additional monitors.
Overview of main menu items like Call, Log, Contacts, Information, Message, Picture, and Alarm log.
Access live camera feeds, digitally zoom areas, and reset zoom settings.
Controls the door opener and puts the monitor into standby mode.
Navigates to the system settings menu for various configurations.
Change password, select ringtones, adjust ringtone duration and volumes.
Configure auto-answer, Do Not Disturb (DND) modes, and touch sound.
Format the microSD card for storage.
View model, version, SN, and select display language.
Access advanced settings, configure network parameters via DHCP or manually.
Add compatible network cameras and set up NTP for time synchronization.
Search for added devices and restore settings to default or previous states.
Use ABUS IP Installer to set network settings for door station and monitors.
Integrate door station camera into ABUS NVR and view live image in ABUS IDVR Plus app.
