Abus TVIP10055B - Page 20

20
Initializing
Restart:
If you press the Reset button once, the camera will restart.
Factory settings: Pressing this button causes the factory settings of the camera to be loaded. The
selection must be confirmed.
Save settings: Here you can save a backup file of all camera settings.
Load settings:
Settings saved to a backup file can be loaded here.
Update firmware:
A more current version of the camera firmware can be loaded here. Information
on updated firmware files can be found in the Software section at
“http://www.abus.com”.
Language
Upload language packet:
You can set a different language here by uploading a language file. The following
language is standard as default:
TVIP10005B -> German
TVIP10055B -> German
The language files can be found on the supplied CD-ROM or inside the product
area under www.abus.com.