30
Attention: Depending on the camera model used, the selection of setting options may
vary.
For more information on the settings, please refer to the operating instructions of the
camera.
Select the camera to be set
Here you can change the name for the camera
Here you can select what is to be displayed in the camera image
and in what format:
Name, date, weekday
Here you can adjust the brightness, contrast and saturation of the
image.
Depending on the installation of the camera, it may be necessary to
make the following settings:
Corridor mode: Rotates the image by 90°.
Mirror mode: Tilts or mirrors the image.
Here you can adjust the exposure time of the camera
Here you can adjust the behaviour of the day/night switching and
activate/deactivate SMART-IR.
Here you can adjust the WDR behaviour of the camera
Here you can adjust the Digital Noise Reduction (DNR) of the
camera
To Next Page
Loading...
