Abus TVVR36301 - Intelligent Event

33
Intelligent event
Note: Depending on the camera used, different VCA functions are available. For
detailed instructions on how to use the function, please refer to the camera's manual.
The functions listed here are the most commonly available VCA functions:
Motion detection
The recorder only processes motion detection within the
camera.
If a live image of the camera is displayed in this dialogue, you
can directly configure the camera's motion masks.
Note: The displayed settings for motion detection are basic
settings. Detailed settings may be offered in the web interface
of the camera.
Sabotage
monitoring
The sabotage monitoring function monitors the brightness
value of the selected camera. If the lens is covered, the
trigger strikes.
Video loss
The video loss function monitors the selected camera for
image loss. If the camera is no longer accessible via the
network, the trigger is activated.
Alarm input
The alarm input function monitors the behaviour of the
physical and virtual alarm inputs.
Alarm output
The alarm output function defines the behaviour of the
physical and virtual alarm outputs.
Exception
The Exception function defines the behaviour of the recorder
for warning messages and system events.
Tripwire Detection
The Tripwire function triggers an event when an object moves
across a virtual line in one or both directions.