34
Recording
Timetable
First activate the schedule, click on a trigger and then drag in the weekly calendar
with the left mouse button pressed to define the desired times.
By clicking on the button "Advanced" the following settings can be made.
Extended
The Intrusion Detection function triggers an event if an object
remains in the area to be monitored for longer than the set
time.
This function triggers an event if the image content changes
seriously. A twisting of the camera can thus be detected.
For each type of event (motion or VCA events), the following is
recorded
Activates audio recording (provided the camera delivers an audio
signal and the stream is switched to "Video & Audio")
Here you activate the pre-alarm recording
Note: Depending on the system configuration and the number of
cameras, a storage time of up to 10 seconds can be achieved.
Select the duration for post-alarm storage for event recordings
Select the stream source for the recording. With "Stream1&2" both
streams are recorded
Specify how many days the recordings are to be kept before they
are overwritten
To Next Page
Loading...
