[4] wAppLoxx Pro oval – installation instructions
Information on the battery:
The wAppLoxx Pro Cylinder is powered with direct current via a 3 V CR2 lithium battery that is
included in the scope of delivery.
• When inserting the battery, ensure the polarity is correct.
• Batteries must not be exposed to direct sunlight or other heat sources or stored in
places exposed to very high temperatures.
• Keep batteries away from children.
• Batteries are not rechargeable.
• Batteries must not be dismantled, pierced or otherwise damaged. They must not be
burned, come into contact with water or be short-circuited.
• When replacing the batteries, the respective temperature specifications of the
manufacturer must be observed
To ensure a long lifespan and safe operation, you must use the following high-quality
batteries:
VARTA CR2 / CR17355 3 V lithium battery
If you do not use a Varta CR2 battery, the specified lifespan cannot be guaranteed and
it is not possible to ensure that the battery warning display of the WLX Pro Control will
be correctly displayed.