[5] wAppLoxx Pro oval – installation instructions
Technical data
Cylinder variants: WLX Pro Nordic, reader outside
WLX Pro Nordic Rokoko
Scope of delivery: Double knob cylinder, quick guide, 3 V CR2 lithium battery,
forend screw
Required accessories: ABUS Mifare DESfire EV1 Tag, WLX Pro Tool Set, small (battery
replacement)
Optional accessories: WLX card reader
Tags: ABUS Mifare DESfire EV1 Tag
4-byte/7-byte Mifare Classic tags
(we accept no liability for the use of other tags)
Configuration: Via wAppLoxx Pro Control
Power supply: 3 V CR2 lithium battery
Conditions of use: -25 °C to +65 °C
Drilling protection Standard, Security
IP protection class: IP 67
Outer knob dimensions: Diameter 38 mm, length 48 mm
Material: Knob: stainless steel, reading cap: plastic
Outer knob colour variants: black, white, grey
Delivery status: Coupled
(Decoupling is not carried out until it has been successfully
programmed into the wAppLoxx Pro Control)
Functions: Opening period can be set to 6 or 12 seconds
Tag reader
Remote access
To Next Page
Loading...
Need help?
General
