Abus wAppLoxx Pro Series User Manual

[12] wAppLoxx Pro oval – installation instructions
Logging the wAppLoxx Pro Cylinder into and out of the wAppLoxx
Control
Logging a wAppLoxx Pro Cylinder in:
Create a new wAppLoxx Cylinder via the wAppLoxx Control Pro user interface and click on “Register”
– for more information, please see the user guide of the wAppLoxx Control Pro. Now hold the
wAppLoxx Pro System Card in front of the cylinder to be registered.
Logging a wAppLoxx Pro Cylinder out
In order to log a cylinder out of the WLX Pro system, proceed as follows.
Hold the wAppLoxx Pro System Card in front of the
cylinder to be logged out.
10 x red
A flashing red signal will come on.
While this flashing red signal is on, you must hold the
WLX Pro Reset Card in front of the cylinder to be
deregistered.

Abus wAppLoxx Pro Series Specifications

General

Brand	Abus
Model	wAppLoxx Pro Series
Category	Door locks
Language	English