36
OTHER SETTINGS
DISABLE BEEPING
Holding the mode and up buttons for 3 seconds will turn off beeping
sounds. A single beep will indicate beeping sounds are disabled when
using the onboard controller. Holding the mode and up buttons again will
re-enable them.
HOLD +
AUTO INCREASING OR DECREASING
Holding the up or down button will increase or decrease the user setting
automatically until you release them.
HOLD +
RESET TO OFF/DEFAULT
Holding the up and down buttons together for 2 seconds will reset the
value of your current mode or setting to default. In AUTO and VPD Mode,
pressing either the up or down button will return to its previous value.
HOLD +
To Next Page
Loading...
