7
ARS-2021/2021S Copy Smart Plus
Chapter 2 Installation Procedure
When you get CD Copy Smart Plus, you could find the package in the following
possibilities: whole duplicator without writer installed & completed duplication
system.
2.1 Whole duplicator without writer installed
Unpack the package of the duplicators.
Prepare the CD-R/RW writers according to the recommendation of list
for installation. Please check for unlisted CD-RW writer if needed from
supplier.
Assemble the duplicator according to your need.
Make sure that the voltage setting is correct.
2.2 Completed duplication system
Unpack the package of duplicators.
Check the entire unit to see if there is any mal-function or damage found.
Make sure that the voltage setting is correct.
Hard drive is an optional installation to the duplication system.
To Next Page
Loading...