To Next PageTo Next Page
Need help?Do you have a question about the ACC SmarTouch Digital and is the answer not in the manual?
Details the user-centric design, ease of operation, and customizability of the control system.
Explains the system's focus on energy efficiency and how sensors monitor temperature.
Step-by-step instructions for adjusting the spa's desired temperature using the control panel.
Explains the function of the SET key in managing spa operations after use.
Guide on how to correctly set the current time on the spa control panel.
Details the Cool-Down Timer, User Timer, and the energy-saving Economy mode.
Describes the operation of buttons like Jets, Air, Aux, and Light on the SC-2020 panel.
Explains how to invert the temperature display and other visual indicators.
Details the button operations for Jets, Air, and Light on the SC-1000 panel.
Covers display inversion and other visual aspects of the SC-1000 panel.
Explains user-configurable settings (U1-U8) for system behavior.
Details factory-protected settings (P1-P8) that manage system hardware.
Lists common error codes (CoLD, OH, SEOP, SESH, HLer) and their meanings.
Covers user-configurable (U1-U8) and protected (P1-P8) system settings.
Lists system error codes (PSoC, PSOL, PSOH, toE) and provides explanations.
Step-by-step guide for filling and initiating the spa after installation or draining.
Explains water pressure issues and the importance of filter cartridge maintenance.
Warnings about child access, hair entrapment, and suction fitting safety.
Guidelines on electrical shock prevention and safe water temperatures.
Advice for specific health conditions, pregnancy, and medication use.
Safety notes for gas heaters and blowers.
Introduces parameter programming for timing elements and temperature calibration.
Explains how to navigate menus, change values, save, discard, and timeout behavior.
Detailed steps to set start times and durations for filtration periods FP1-FP4.
Instructions for configuring the silence period (SIL) and its effect.
Lists parameters for filtration start times (FP1-FP4) and silence period start time (SIL).
Details duration settings for filtration (FP1d-FP4d) and silence timers (SILd).
Explains parameters for Cool Down (CLDN), Economy Cycle (ECL), and Channel Clear (CHCL).
Details settings for User Time Out (UTO) and Post Use Filtration (PUF).
Guide on calibrating the temperature sensor reading (CALB).
Explains how to save (SEND) or discard (CANC) programmed parameter changes.
Critical warning regarding the absolute maximum safe spa temperature.
Notice on using qualified electricians, NEC, and general wiring safety.
Specific instructions for connecting wires in a 120-volt spa system.
Specific instructions for connecting wires in a 240-volt spa system.
Details required breaker size, wire gauge, and conductor material (copper).
Illustrates the 3-wire 220V connections with ground for installation.
Specifies breaker types and requirements for 240V and 120V systems.
Guides on converting the spa system between 120V and 240V operation.
Details FCC ID, compliance conditions, and interference guidelines for the USA.
Outlines compliance standards and conditions for Canada.
Step-by-step instructions for connecting the spa control system to a Wi-Fi network.
Electrical schematic for the SMTD 1000 spa control system.
Electrical schematic for the SMTD 2000 spa control system.
Electrical schematic for the SC-1100 (Jr.) spa control system.
Electrical schematic for the SC-3000 spa control system.
An exploded view illustrating the enclosure and various spa control system components.
Explains various error codes (COLD, OH, HLer, PSOL, etc.) and their causes.
Guides on diagnosing and resolving issues related to pump operation and water flow.
Steps to troubleshoot lack of power and the spa failing to heat.
Troubleshooting for heater contactor problems and overheat error codes.
Addresses issues caused by flow restrictions, such as clogged filters or airlocks.
Details the user-centric design, ease of operation, and customizability of the control system.
Explains the system's focus on energy efficiency and how sensors monitor temperature.
Step-by-step instructions for adjusting the spa's desired temperature using the control panel.
Explains the function of the SET key in managing spa operations after use.
Guide on how to correctly set the current time on the spa control panel.
Details the Cool-Down Timer, User Timer, and the energy-saving Economy mode.
Describes the operation of buttons like Jets, Air, Aux, and Light on the SC-2020 panel.
Explains how to invert the temperature display and other visual indicators.
Details the button operations for Jets, Air, and Light on the SC-1000 panel.
Covers display inversion and other visual aspects of the SC-1000 panel.
Explains user-configurable settings (U1-U8) for system behavior.
Details factory-protected settings (P1-P8) that manage system hardware.
Lists common error codes (CoLD, OH, SEOP, SESH, HLer) and their meanings.
Covers user-configurable (U1-U8) and protected (P1-P8) system settings.
Lists system error codes (PSoC, PSOL, PSOH, toE) and provides explanations.
Step-by-step guide for filling and initiating the spa after installation or draining.
Explains water pressure issues and the importance of filter cartridge maintenance.
Warnings about child access, hair entrapment, and suction fitting safety.
Guidelines on electrical shock prevention and safe water temperatures.
Advice for specific health conditions, pregnancy, and medication use.
Safety notes for gas heaters and blowers.
Introduces parameter programming for timing elements and temperature calibration.
Explains how to navigate menus, change values, save, discard, and timeout behavior.
Detailed steps to set start times and durations for filtration periods FP1-FP4.
Instructions for configuring the silence period (SIL) and its effect.
Lists parameters for filtration start times (FP1-FP4) and silence period start time (SIL).
Details duration settings for filtration (FP1d-FP4d) and silence timers (SILd).
Explains parameters for Cool Down (CLDN), Economy Cycle (ECL), and Channel Clear (CHCL).
Details settings for User Time Out (UTO) and Post Use Filtration (PUF).
Guide on calibrating the temperature sensor reading (CALB).
Explains how to save (SEND) or discard (CANC) programmed parameter changes.
Critical warning regarding the absolute maximum safe spa temperature.
Notice on using qualified electricians, NEC, and general wiring safety.
Specific instructions for connecting wires in a 120-volt spa system.
Specific instructions for connecting wires in a 240-volt spa system.
Details required breaker size, wire gauge, and conductor material (copper).
Illustrates the 3-wire 220V connections with ground for installation.
Specifies breaker types and requirements for 240V and 120V systems.
Guides on converting the spa system between 120V and 240V operation.
Details FCC ID, compliance conditions, and interference guidelines for the USA.
Outlines compliance standards and conditions for Canada.
Step-by-step instructions for connecting the spa control system to a Wi-Fi network.
Electrical schematic for the SMTD 1000 spa control system.
Electrical schematic for the SMTD 2000 spa control system.
Electrical schematic for the SC-1100 (Jr.) spa control system.
Electrical schematic for the SC-3000 spa control system.
An exploded view illustrating the enclosure and various spa control system components.
Explains various error codes (COLD, OH, HLer, PSOL, etc.) and their causes.
Guides on diagnosing and resolving issues related to pump operation and water flow.
Steps to troubleshoot lack of power and the spa failing to heat.
Troubleshooting for heater contactor problems and overheat error codes.
Addresses issues caused by flow restrictions, such as clogged filters or airlocks.
General| Model | SmarTouch Digital |
|---|---|
| Category | Control Systems |
| Mounting | Wall Mount |
| Display | LCD |
| Input Voltage | 24V |
| Communication Protocol | RS-485 |
| Operating Temperature | 0°C to 50°C |
| Humidity Range | 10% - 90% non-condensing |
| Brand | Advanced Control Corporation (ACC) |
