Access Interfacing Solutions ADR100 - Specifications

Page 15 of 16 Copyright © Access-IS 2018
A. Specifications
Specification
Details
Dimensions (W x D x H)
106 mm x 79 mm x 86 mm
Weight
285 g (excluding cable and power supply unit)
Environmental
Operating temperature: 0ºC to 50ºC
Storage temperature: 0ºC to 60ºC
Humidity: 0 to 95% non-condensing
Body
Black ABS
Glass
4 mm toughened platen
BS EN60068-2-75 and IEC 62262:2002, rated to 6.375 J impact,
with anti-reflective coating
Communications and host
Communication: USB 2.0 high speed
Connection: USB Micro-B connector
Host (minimum): Pentium-4 3 GHz, 2 GB RAM
Supported operating systems: Windows XP and above, 32-bit or
64-bit
Power requirements
24 V DC power supply via Molex connector
Image capture
Full page: JPG, BMP, TIFF, PNG
Resolution: 600 DPI
MRZ reading (if IR option fitted)
Illumination sources: Visible/white, UV and optional IR LEDs
Standard OCR font: OCR-B
Travel and identity documents: 1 line of 30 characters, 2 lines of
36 characters, 3 lines of 30 characters
Barcode reading (optional)
Reads barcodes from mobile phones, tablets and paper
Linear: EAN/UPC, Code 2 of 5, Interleaved 2 of 5, IATA 2 of 5,
Code 39, Code 128
2D: IATA resolution 792, PDF417, Aztec, DataMatrix and QR
codes
(Full list of supported barcodes available on request)
MTBF
85,000 hours
Approvals
CE EMC Class B
• EN 55022
• EN 55024
CE Low Voltage Directive
• EN 60950-1
• IEC 62471: 2006 - Exempt Class
FCC 47CFR Part 15 Subpart B Class A
Canadian Standard ICES-003: Issue 6