46
î Filling Coolant
1. Position the draining bolt and Aux Liquid Bottle in place.
2. First fill up the radiator and then the Aux Liquid Bottle until the
coolant level reaches the upper limit.
3. Ensure that the radiator cap and Aux Liquid Bottle cap are
firmly closed
4. Start the engine and let the radiator fan run more than two
times. Then stop the engine. (Be sure to wait until the radiator
cools down before opening the cap, to avoid getting burnt.)
5. Open the radiator cap and check that coolant level is still at the
upper limit, if not, refill coolant and then firmly tighten the cap.
6. Start the engine again and let it run for 1-2 minutes. Open the
radiator cap and check that the coolant level is still at the upper
limit, if not, refill coolant again. Keep repeating this procedure
until coolant level can retain at the upper limit.
To Next Page
