Need help?Do you have a question about the AccuBANKER AB5500 and is the answer not in the manual?
General| Type | Banknote counting machine |
|---|---|
| Product color | Blue, White |
| Detection types | MG / UV |
Lists the items included in the product packaging for verification upon purchase.
Details selecting a suitable workspace and the correct power sources for operation.
Instructions for turning the unit on and a note regarding fuse replacement.
Guidance on preparing banknotes before counting to ensure accurate results.
Describes the unit's self-check procedure upon powering on.
Explains how to adjust the thickness knob for optimal counting performance.
Detailed identification of the various physical components of the bill counter.
Overview of the control panel and its main elements.
Detailed explanation of each button's function on the control panel.
Explains how to select denominations to calculate the total monetary value.
Details how to view and print counting summaries and reports.
How to use MG detection for counterfeit bills, including sensitivity settings.
How to use UV detection for counterfeit bills, including sensitivity settings.
Information on selecting different counting speeds for the unit.
How to use the RESTART button and set preset batch quantities.
Explanation of the +/- buttons for scrolling and customizing settings.
Steps for powering on the unit and preparing it for counting.
How the unit operates in automatic counting mode once bills are loaded.
Guide to selecting various functions like UV, MG, ADD, and BATCH.
Further details on using the DEN function for denomination-based counting.
Explains how to view and print detailed counting reports.
Tips on how to prevent issues by pre-selecting notes and avoiding contaminants.
Steps to take when a bill jam occurs and how to prevent future jams.
How to address and resolve issues causing inaccurate bill counts.
Procedure for cleaning sensors to maintain accurate counting performance.
How to adjust the UV counterfeit detection sensitivity.
How to adjust the MG counterfeit detection sensitivity.
Explanation of UV and MG alarm causes and solutions.
Causes and solutions for chain alarms, half alarms, and empty hopper messages.
Troubleshooting for emergency stop, count sensor, and stacker sensor errors.
To Next Page
