11
4. Configurations Menu Description (continued)
CURRENCY CF
In this section, the operator configures the sensitivity of the detection sensors
of the various banknote security verification functions.
• DD: Bill Size Detection.
• DB: Double Bill Verification.
• UV: Ultraviolet Detection.
• MG: Magnetic Detection.
• MT: Metal Thread Detection.
• IR: Infrared Detection.
With the keys select the specific denomination to configure. Press
ACCEPT to display the functions menu for that specific denomination. Use
the keys to change the sensitivity to the desired value. Press
ACCEPT to save the changes made.
MANUAL INPUT
Enables / Disables the option to save a certain count in the unit’s memory
(Grand Total option).
PORT L MODE / PORT R MODE
Set the L (left) or R (right) port function to be connected to a computer
(TERMINAL) or to be connected to a printer (PRINTER).
PORT L RATE / PORT R RATE
Configures the communication speed of the serial port
(9600/19200/38400/115200).
• PRINTER: Data bits: 8 / Stop bits: 1 / Parity: None.
• TERMINAL (PC): Data bits: 7 / Stop bits:1 / Parity: None.
To Next Page
