12
4. Configurations Menu Description (continued)
CIS SELECT
Activates / Deactivates the CIS sensor in CNT mode (basic counting)
SELECT DIGIT
Allows operator to select the format in which to separate the digits on the
display or during printing
EXTERNAL DISPLAY
Activates / Deactivates external display’s connection
TIME CHECK
Allows operator to configure the unit to the date and time desired
STACKER FULL
Allows operator to set the maximum capacity of the stacker OFF/100/200.
ADD FUNCTION (SDC mode)
During operation in SDC mode, with ADD function active, the user can
select manual or automatic operation. In both operations, if there is a specific
denomination in the stacker, and the user tries to count a different
denomination, it will be rejected. The user must remove the bills from the
stacker to proceed with a new denomination.
• Manual: When the user removes the bills of the current denomination
from the stacker, the new denomination will be counted and added to the
previous count unless the clear button is pressed.
• Automatic: When the user removes the bills of the current denomination
from the stacker, the new denomination will be counted and the previous
count will clear (will start from zero).
To Next Page
