Ace 27201 - Safety Instructions for Bench Grinder; Dress for Safety

SAFETY INSTRUCTIONS FOR BENCH GRINDER
KNOW YOUR POWER TOOL - Read the OWNERS MANUAL carefully. Learn the tool’s applications and limitations, as well
as the specific potential hazards peculiar to it.
WHEN INSTALLING OR MOVING THE BENCH GRINDER
Inspection — To be certain the grinding wheels have not been damaged in shipment, inspect carefully. If you suspect a wheel
of being fractured, REPLACE IT IMMEDIATELY. Fractured wheels may shatter causing serious injury.
PUT BENCH GRINDER ON A FIRM LEVEL SURFACE where there is plenty of room for handling and properly supporting the
workpiece. Bench grinder should be secured by using bolts and nuts on a firm, level surface.
AVOID DANGEROUS ENVIRONMENT. Use the grinder in a dry, indoor place protected from rain. Keep work area well lighted.
DISCONNECT TOOLS before servicing or when changing accessories such as grinding wheels.
PLAN AHEAD TO PROTECT YOURSELF - to avoid injury from accidental contact with moving parts.
KEEP GUARDS IN PLACE and in working order.
AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in.
USE THE RIGHT TOOL — Don't force tool or attachment to do a job for which it was not designed.
REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before
plugging in.
USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories.
The use of improper accessories may cause risk of injury to persons.
NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting is unintentionally contacted.
DRESS FOR SAFETY
WEAR PROPER APPAREL — Wear protective hair covering to contain long hair. Don't wear loose clothing or jewelry that could
get caught in moving parts. Rubber soled footwear is recommended for best footing.
WEAR GLOVES when grinding workpiece. Object may become very sharp and can cause injury.
USE SAFETY GLASSES -— Also use face or dust mask if grinding operation is dusty.