Ace ESP-150A 1-1/2 HP User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

23833A414 (Rev. 01/03/17) Bag #23834A018

Model

ESP-75A 3/4 HP 4039145

ESP-100A 1 HP 4039152

ESP-150A 1-1/2 HP 4039160

ESP-200A 2 HP 4063558

CONSUMER HOT-LINE: 1-800-422-1551

Monday-Friday 7 AM to 5 PM CST

INSTALLATION MANUAL

Lawn Sprinkler for Inground

Sprinkler Systems

WARRANTY: Product defects covered for 12 months from date of purchase.

Receipt is required for warranty claim.

Table of Contents

Questions and Answers:

A
April MillerAug 9, 2025
Why Ace Irrigation System pump does not deliver rated capacity?
- D
  David RoseAug 9, 2025
  Several factors could be at play. It might be due to insufficient submergence of the suction pipe; ensure it's at least 3 feet below the water level. Verify that the pump's voltage matches the power supply voltage. Check the valve, suction piping, foot valve, or well point for any issues. The discharge system head might be too great, or the well depth could exceed the pump's capacity. The pump flow might be greater than the well flow capability. Ensure all connections are airtight and that the suction pipe isn't too small; it should be a 1-1/2" pipe.
C
Charles BurgessAug 18, 2025
What to do if Ace Irrigation System pump will not prime?
- R
  robertstoutAug 18, 2025
  If your pump isn't priming, try these steps: Stop the motor, remove the 1-1/2" pipe plug, and fill the case with water. Ensure the pump voltage matches the power supply voltage. Inspect the valve, suction piping, foot valve, or well point. The foot valve might be sitting in sand or mud, stuck shut, or leaking. Check all connections to ensure they are airtight and check for a leaky shaft seal.

Ace ESP-150A 1-1/2 HP Specifications

General

Brand	Ace
Model	ESP-150A 1-1/2 HP
Category	Irrigation System
Language	English

Related product manuals

Ace ESP-200A 2 HP

Preview: Ace ESP-75A 3/4 HP

Ace ESP-75A 3/4 HP