TABLE OF CONTENTS
WARNINGS
AVOID HIGH PRESSURE FLUIDS
Escaping uid under pressure may penetrate the skin causing serious injury. Avoid the hazard
by relieving pressure before disconnecting hydraulic lines. Tighten all connections before
applying pressure and inspect hoses regularly for wear or damage. If an accident occurs,
see a doctor immediately. Any uid injected into the skin must be surgically removed within
a few hours or gangrene may result.
NEVER OPERATE MOTOR UNLESS ATTACHED TO PUMP
The motor should never be operated separate from the pump. The four bolts which attach
the motor to the pump also provide the strength necessary to hold the motor together during
operation. Operating the motor separate from the pump may cause the motor to explode.
The shaft seal may also be ejected when hydraulic pressure is applied. Motor damage and
personal injury may result.
HANDLE CHEMICAL PRODUCTS SAFELY
Direct exposure to hazardous chemicals may cause serious injury. Potentially hazardous
chemicals used with Ace pumps are hydraulic uid, fertilizer, and chemicals. A Material Safety
Data Sheet (MSDS) provides specic details on chemical products: physical and health
hazards, safety procedures, and emergency response techniques. Check the MSDS before
starting any job using a hazardous chemical.
Note: Pump performance data, dimensions, and parts listings
are on individual pump specication sheets and are not included
in this manual. The specication sheets may be downloaded
from the Product Literature page at www.AcePumps.com or
call 800-843-2293 to request a copy.
sgninraW1
margaiDgnibmulP2
serutaeFrotoM2
snoitsegguSgnibmulPreyarpS3
gnitnuoMpmuP3
snoitcennoCmetsySciluardyH3
slaeSciluardyH3
pmuPreyarpSehToTwolFciluardyHgnitalugeR 4
snoitcurtsnIylbmessasiD6
stiKriapeRpmuP6
snoitcurtsnIylbmessA7
ecnanetniaM7
noitallatsnI&stiKriapeRrotoM8
gnitoohSelbuorT01
1
To Next Page
Loading...
