System Housing 1-17
5. Insert the right end of the bar into the hole near the hard disk
drive frame and the left end into the hole on the rear panel.
LVD SCSI Backplane Board
The LVD SCSI hot-swap cage includes a hot plug SCA single-ended
backplane, LED board, and the hard drive cage itself. It supports
three 1-inch SCA-II SCSI hard drives in one channel with active
terminator built-in. The SCA II connector design allows for the
addition and removal of SCSI drives without shutting down the system.
Left End
Right End
To Next Page
Loading...
