5-18 Service and Maintenance
3. Attach the four (4) screws to secure the HDD module to the lower case.
NOTE: Screw torque force = 1.8~2.2kgf.cm
Figure 5-21. Securing the Screws
4. Install the HDD door (see HDD Door Installation on page 5-13).
Table 5-11. HDD Module Screws
Screw Name Screw Type Torque Quantity
M 2.0 x 3.0
1.8~2.2kgf.cm
4
To Next Page
Loading...
