Acer A315-53 - Shell Secure Flash Utility SOP (for Service BIOS)

System Utilities 2-22
Shell Secure Flash Utility SOP (For Service BIOS)
NOTE:
Plug the AC power adapter to a power source before performing the Shell Secure Flash Utility.
1. In Windows OS, unzip the compressed file of BIOS ROM package
“BIOS_V1.xxS_Shell_X64.zip” (V1.xxS = Version 1.xx), and then copy the “Shell” and “EFI”
folder to the root of the USB HDD (formatted as FAT32).
NOTE: In the example below, the file is unzip and saved in E:\ location.
Figure 2-18. Unzip and Copy BIOS ROM Package
2. Power on the target machine. Press F2 during boot to enter the BIOS Setup Menu. In the Boot
menu ensure the Boot Mode is “UEFI”. Then set the “USB HDD:” as the first boot device in
Boot priority order.
Figure 2-19. Configure Boot Parameters
%,26B96B6+(//B;
7\SH]LS$UFKLYH
%,26B96
B
6KHOO
B
;
6KHOO
(),
&96HIL
%RRW
FAT32 format
USB HDD
Copy
Unzip
%RRW[HIL
InsydeH20 Setup Utility Rev. 5.0
Information Main Security Boot Exit
Boot Mode: [UEFI]
Secure Boot: [Enabled]
Boot priority order:
1. USB HDD :Sony Storage Media
2. Windows Boot Manager (HFS256G39TND-N210A)
Item Specific Help
Use < ↑ > or < ↓ > to select a device, then
press <F5> to move it down the list, or
<F6> to move it up the list. Press <Esc>
to escape the menu
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit
←→
Select Menu
Enter Select
►Sub-Menu F10 Save and Exit