2-5 System Utilities
Main Tab (Windows 10)
The Main tab allows the user to set the system time and date, enable or disable boot option, and
enable or disable recovery.
Figure 2-2. BIOS Main (Windows 10)
Table 2-11. BIOS Main Tab Parameters (Windows 10)
Product Information Example Remark
System Time HH:MM:SS
• The format is the number of string.
• The hours are displayed in 24-hour format.
• The values set in the two fields take effect
immediately.
System Date MM/DD/YY
Network Boot [Enabled] / [Disabled]
The default Network Boot value in different
Boot Modes:
• [UEFI] Boot Mode : [Disabled]
• [Legacy] Boot Mode : [Enabled]
F12 Boot Menu [Enabled] / [Disabled]
• This function enables or disables the ability
that user can press F12 while POST to
quickly select the boot device.
• Modification to the boot device order apply
only for the current session. The next time
your computer is rebooted it will use again
the boot device sequence as set in the
BIOS Setup Utility > Boot > Boot priority
order:.
• The default value is [Disabled].
InsydeH20 Setup
Utility
Rev. 5
.0
F1 Help
Select
Item F5/F6
Change
Values F9
Setup
Defaults
Esc
Exit
Select
Menu
Enter Select
►Sub-Menu F10
Save
and Exit
System Time : [19:10:49]
System Date : [01/01/2017]
Network Boot: [Disabled]
F12 Boot Menu: [Disabled]
Wake on LAN: [Disabled]
Touchpad: [Advanced]
Lid Open Resume: [Enabled]
Wake on USB while lid closed [Disabled]
D2D Recovery: [Enabled]
GPT Partition Recovery: [None]
Clear GPT Partition [None]
GPT Partition Record: No Record
Information Main Advanced Security Boot Exit
Item Specific Help
Hour valid range is from 0 to 23.
Minute Valid range is from 0
to 59. Second Valid range is from 0 to
59. REDUCE/INCREASE : F5/F6.
To Next Page
Loading...
