2-49 System Utilities
14. Write Asset Tag to EEPROM
[Instruction] DMITOOLSx86 /Wasset Acer Asstag
Figure 2-80. Write Asset Tag
NOTE:
• After writing items (8)~(14), restart the system to get the latest DMI data.
• If using the write command, enter the correct command string. Otherwise, it will display a
syntax error.
Figure 2-81. Syntax error
C:\>DMITOOLSx86 /Wasset Acer Asstag
================================================================
COMPAL ELECTRONICS INC. V2. 0. 0. 7
Author : STD SID TEAM.
WARNING: THIS PROGRAM IS FOR INTERNAL USE ONLY.
Copyright c 2012 COMPAL ELECTRONICS INC. All rights reserved.
================================================================
Waiting………………………………
Successful, Please restart system to make this new DMI data effective.
C:\>DMITOOLSx86 /Wlm
ERROR: The syntax of the command is incorrect!
Parameter is lack case:
ERROR : The input parameter is lack.
Over parameters case:
ERROR : The input parameter is too much.
Syntax is wrong case:
ERROR : The syntax of the command is incorrect.
Write command with String which length is
too long case:
ERROR : The string length is invalid.
Write UUID and its length is too long or short case:
ERROR : The UUID length is invalid.
Write LAN MAC and its length is too long or short case:
ERROR : The LAN MAC length is invalid.
Write UUID and
don’t use Hexadecimal number case:
ERROR : The input parameter is invalid, Please use hexadecimal number.
Write LAN MAC in Broadcom LAN case:
ERROR : Write LAN MAC only support Atheros/ Realtek LAN
To Next Page
Loading...
