7. Assembly and Disassembly Procedures (continued)
Part Number
Part Name
6814175010P14 LCD_17"W_HSD170MGW1-A00(LTC) _HSD_1370g 1 -
7742005280P0A SPONGE_G ASKET FORM_WHT_W10xH10xL40mm 1
-- -
-- -
-- -
7110330052P0A SCREW-M ACHING-FLAT HEAD-M3-5-NI 4 Screw Size=M3x5; Torque:=2~3KGF.CM
Spare Parts List
Q'ty Remark
S6
Put a panel on a protective cushion and exame the surface
see if has any unexpect dust or scratch.
S7
Turn over the panel and stick a Gasket form on the position
A.
S8
Move the Bracket Chassis M odule on the top of the LC D
panel and connect FFC cable to LCD panel.
Take lamp cables out from the holes shown as the photo.
Plug 4 lam p cables to the connectors of Power Board.
S10
Use a Ph illip s-head screwdriver screwed the No.1~4 screws
on both side and assemble the LCD panel and Bracket
Chassis module.
Steps Photo
S9
Procedures
Panel Lam p cables
A
1 2
3
4
3
4
Go to cover page
42
ACER AL1716W
To Next Page
Loading...
