7. Assembly and Disassembly Procedures (continued)
S11
Use both hand to remove the LCD panel module and put Rear
Bezel aside.
S12
Use a Phillips-head screwdriver unscrewed the screw to
release the Heat-sink.
S13
Use a Phillips-head screwdriver unscrewed the number 1~2
screws to disassemble the power plug.
S14
Use a Hex-head screwdriver unscrewed the No.3~4 Hex Nut to
release the D-Sub connectors .
S15
Use a Phillips-head screwdriver unscrewed the No.1~4 screws
to disassem ble the LCD panel and Bracket Chassis m odule.
S16
Unplug 4 lamp cables (No. 1~4).
Steps Photo
Procedures
3
4
D-Sub Cable
1
2
1 2
3
4
3
4
Part Number Part Name
7737616800P0A RC ASSY_#6800_ABS 94V0_ACER_T17ANHW 1 -
7110330052P0A SCREW-MACHING-FLAT HEAD-M3-5-NI 1 Screw Size=M3x5; Torque=5~7KGFKGF.CM
7140330083P0A SCREW_DOUBLE THREAD_NO NE_F LAT HEAD_M3_8 2 Screw Size= M 3x8; Torque=5~6KGF.CM
7110730082P0A SCREW_MACHINE_NONE_HEX WASHER HEAD_M3_8m m_Fe NI 2 Screw Size=M3x8; Torque=4.5~6.5KGFKG F .CM
7110330052P0A SCREW-MACHING-FLAT HEAD-M3-5-NI 4 S crew Size=M3x5; Torque:=2~3KGF.CM
-- --
Spare P arts Usage
Q'ty Remark
Go to cover page
48
ACER AL1716W
To Next Page
Loading...
