15
Description:
• Brightness: Brightness adjustment, the range from 0 to 100.
• Contrast: Contrast adjustment, the range from 0 to 100.
• H. Position: Horizontal position adjustment.
• V. Position: Vertical position adjustment.
• Phase: Focus adjustment, the range from 0 to 31,32 steps.
• OSD position: OSD position adjustment.
• Auto Adjustment: This feature will automatically adjust size, position, clock and phase.
It takes 3-5 seconds to finish. When auto start, it shows “Auto
Adjusting….” message.
• Clock: Frequency tracking adjustment. The max range from -48 to +48, but
some modes the range will be limited.
• Graph Text: 640x400(GRAPH) or 720x400(TEXT) mode select.
• Language: 5 kinds of language for description, including (English, German,
French, Spanish, Italian)
• Recall: Recall the default value.
• Color Temp: Color temperature for standard 9300,6500, 7500 or user defined.
§ User:
User R: Red signal gain by user defined.
User G: Green signal gain by user defined.
User B: Blue signal gain by user defined.
§ 7500: Set CIE coordinate at 7500°K color temperature.
§ 6500: Set CIE coordinate at 6500°K color temperature.
§ 9300: Set CIE coordinate at 9300°K color temperature.
• Exit: Exit OSD menu function.
Sharpness : Adjust the scale-up effect(smoother or sharper.)
OSD Transparency: Adjust the transparency level of OSD. The range is from 0 to 100 scales.
Comment:
• 1280x1024: Current mode resolution.
• 60 HZ: Current mode vertical frequency±1Hz.
• VER 1.00: Firmware revision.
l Other features:
To Next Page
Loading...
