15
2.2 OSD Menu Description
1. Power: Press this key to control power ON/OFF of the Monitor.
Green: normal display.
Orange flicker: no signal input.
Orange: power off.
2. Auto/Exit: When the input signal source is PC, used to execute auto adjustment
>: Press this button for selection or adjustment when OSD is shown.
3. +/ : Used to select the OSD function; when there is OSD menu, used to increase
function value.
Enter brightness control function directly when there is no OSD menu.
4. —/ : Used to select the OSD function; when there is OSD menu, used to decrease
function value.
Enter contract control function directly when there is no OSD menu.
6. Menu: Use to display OSD menu; when there is OSD menu, used to execute OSD
function or enter next layer of OSD menu; if executing OSD function, exit OSD
function and save the value adjusted.
To Next Page
Loading...
