8
Monitor Features
1.1 Test Conditions
Item Condition
Temperature Normal room temperature (25±2 )℃
Humidity 50±10%
AC input voltage 100V±2V, 120±2V, 60Hz / 240±2V, 50Hz
Brightness Maximum with OSD setting
Contrast Middle with OSD setting
Resolution setting 1680 x 1050 @60HZ
Color temperature With OSD setting. (For TCO03 CCT test condition requirement, the brightness
setting on OSD shall be adjusted to meet 125 nit.)
Measuring instrument Minolta CS-1000T Spectrometer and Photometer CA-210 or equivalent
Others Before measuring, “Auto Adjust” & “Auto Balance” must be done in advance
1.2 Features
22” wide WSXGA+ TFT LCD Panel
TN Mode Liquid Crystal
D-SUB/ DVI-D Input
Audio Function (Optional)
Support to 75Hz Refresh Rate
Support VESA-DCC 2B plug & play function
Support VESA-DPMS & DVI DMPM Power Management Function
Super Wide Viewing Angle
High Brightness & Contrast Ratio
High Brightness & Contrast Angular Dependent
Fast LC Response Time
Light Weight
Chapter 1
To Next Page
Loading...
