11
Backplane board
The backplane board attached to the rear of the hot-plug HDD cage is
what differentiate it from the easy-swap HDD cage model.
11 FDD connector 18 SATA port 0
12 IDE connector 19 External USB connector
13 SATA port 3 20 PCI slot 1 (32-bit/33 MHz/3.3 V)
14 SATA port 2 21 PCI slot 2 (32-bit/33 MHz/3.3 V)
15 Front panel LED connector 22 PCI Express x8 slot (with x4
throughput)
16 SATA port 1 23 PCI Express x8 slot (with x8
throughput)
17 Clear CMOS jumper 24 Rear panel ports
No. Component
1 HDD access LED control jumpers
Close 2-3 – HDD LED control via pin 11 (default)
2 HDD power cable connectors
3 HDD data cable connector
4 HDD connectors
No. Component No. Component
To Next Page
Loading...
