55 Altos R720 Installation Configuration Guide
3. Run the kudzu utility, it will auto detect the Intel 82563EB network
controller and help you to configure it.
# kudzu
4. Restart the network service to bring up both of the network interfaces.
# service network restart
RAID Utility Installation
1. You can find the RAID Web Console 2 in EasyBUILD 7.1 build 100. Please
refer to directory of the RAID Web Console 2 in Software Required
section and copy the utility from the EasyBUILD 7.1 build 100 to HDD first.
# mount /media/cdrecorder
# cp –R /media/cdrecorder/app/r720/raid/Integrated_SAS/Linux/. /tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.13-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2 on, select applications -> System Tools ->
RAID Web Console 2 Startup UI
Red Hat Enterprise Linux 4.0 EM64T Update 2 Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 EM64T Update 2 on Altos R720 with integrated SAS hardware RAID 2.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 2 Installation, the following device
drivers are required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
00.00.03.18 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
0.3.3.3 EasyBUILD 8.0 build 200 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
To Next Page
Loading...
