65 Altos R720 Installation Configuration Guide
2. # ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2, click on start button, select System -> More
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 10 EM64T Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 EM64T on Altos R720 with integrated SAS hardware RAID 2.
Drivers Required
For SUSE Linux Enterprise Server 10 EM64T Installation, the following device
drivers are required. The drivers can be found in the EasyBUILD 7.1 build 600
(or later).
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
00.00.03.18 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
0.3.3.3 EasyBUILD 8.0 build 200 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
IOAT 2.15 EasyBUILD 8.0 build 200 (or later)
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD 7.1 build 600 (or later).
Software Version EasyBUILD Version
RAID Web Console
2
2.63 EasyBUILD 8.0 build 200 (or later)
Configuring integrated SAS hardware RAID 2
Please refer to the APPENDIX B. for the integrated SAS hardware RAID 2
configuration.
Installation Tips
NOTE. The driver of Integrated SAS hardware RAID 2 is required for the SUSE
Linux Enterprise Server 10 EM64T installation. If you do not have the optional
internal USB floppy drive, you need an external USB floppy drive for applying
driver during the OS installation.
1. Since SUSE Linux Enterprise Server 10 EM64T cannot recognize the
integrated SAS hardware RAID 2, you need to make a driver diskette from
To Next Page
Loading...
