41
English
Installing memory
Follow these steps to install memory:
1 Turn off the computer, unplug the AC adaptor (if connected) and
remove the battery pack. Then turn the computer over to access its
base.
2 Remove the screws from the memory cover; then lift up and
remove the memory cover.
3 (a) Insert the memory module diagonally into the slot, then (b)
gently press it down until it clicks into place.
4 Replace the memory cover and secure it with the screw.
5 Reinstall the battery pack, and reconnect the AC adaptor.
6 Turn on the computer.
The computer automatically detects and reconfigures the total
memory size. Please consult a qualified technician or contact your local
Acer dealer.
To Next Page
Loading...
