Chapter 3 47
3. Push out the latches on both sides of the DIMM socket to release the DIMM and remove it from the
socket.
4. Do the same to the other socket if there is any DIMM present.
Removing the Hard Disk Drive Module
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the Lower Cover” on page 45.
3. Using the plastic tab, lift up the the hard disk drive module and remove it from the bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
To Next Page
Loading...
