EasyManua.ls Logo

Acer Aspire 4810TZ Series - Removing the Touchpad Lock Board

Acer Aspire 4810TZ Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 69
9. See “Removing the Keyboard” on page 51.
10. See “Removing the WLAN Board Module” on page 52.
11. See “Separating the Upper Case from the Lower Case” on page 53.
12. See “Removing the Card Reader Board” on page 67.
13. Disconnect the Bluetooth module cable from the bottom of the card reader board.
14. Carefully pry loose and remove the Bluetooth module from the card reader board.
WARNING:The Bluetooth module is glued to the card reader board, only remove the Bluetooth module if it is
defective.
Removing the Touchpad Lock Board
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the Lower Cover” on page 45.
3. See “Removing the Lower Cover” on page 45.
4. See “Removing the Optical Drive Module” on page 46.
5. See “Removing the DIMM” on page 46.
6. See “Removing the Hard Disk Drive Module” on page 47.
7. See “Removing the SSD Module” on page 48.
8. See “Removing the RTC Battery” on page 48.
9. See “Removing the Keyboard” on page 51.
10. See “Removing the WLAN Board Module” on page 52.

Table of Contents

Related product manuals