Chapter 3 107
3. Replace the eleven (11) screws on the lower cover.
4. Turn the device over, and replace the five (5) remaining screws on the upper cover.
NOTE: Upperleft screw has a grounding wire attached to the LVDS wire. Ensure it is reattached during
reassembly process.
Step Size Quantity Screw Type
Lower Cover M2*6 (red call out) 4
M2*3 (green call out) 2
M2*4 (purple call out) 5
Step Size Quantity Screw Type
Upper Cover M2*6 5
To Next Page
Loading...
