30 Chapter 2
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices
includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.
Information Main Advanced Security Power Boot Exit
Boot priority order:
1. IDE0 : WDC WD1600BEVT-22ZCT0-(S1) Use <
↑
> or <
↓
> to
2. IDE1 : HL-DT-STDVDRAM GT10N-(S3) select a device, then
3. Network Boot : Realtek Boot Agent press <F6> to move it
4. USB HDD : up the list, or <F5>
5. USB FDD : to move it down the
6. USB KEY : list. Press <Esc> to
7. USB CD/DVD ROM : escape the menu.
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
←→
Select Menu Enter Select
X
Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Item Specific Help
To Next Page
Loading...
