Chapter 3 51
Removing the WLAN Modules
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. See “Removing the DIMM Module” on page 46.
4. See “Removing the Back Cover” on page 47.
5. See “Removing the Hard Disk Drive Module” on page 48.
6. Disconnect the black antenna cable from connector #1 and the white antenna cable from connector #2 on
the short wireless board module.
7. Remove the one screw (F) securing the short wireless board module to the system.
8. Detach the short wireless board module from the WLAN socket.
Size (Quantity) Color Torque Part No.
M2 x L4 (1) Silver 1.6 kgf-cm 86.9A552.4R0
To Next Page
Loading...
